[استفسار] : هل يعنى هذا الفحص ان هناك مشكله فى الهارديسك ؟

[محروم.كوم]

root@server [~]# smartctl -d ata -a /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-531.17.1.lve1.2.60.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, smartmontools

=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation ES.2 (SATA 6Gb/s)
Device Model: ST33000650NS
Serial Number: Z293SDQE
LU WWN Device Id: 5 000c50 04de545f8
Firmware Version: 0004
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Aug 25 1854 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.

Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine

recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 433) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 071 063 044071 063 044071 063 044071 063 044071 063 044071 063 044 Pre-fail Always - 13935595
3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 087 060 030087 060 030087 060 030087 060 030087 060 030087 060 030 Pre-fail Always - 584193040
9 Power_On_Hours 0x0032 082 082 000082 082 000082 082 000082 082 000082 082 000082 082 000 Old_age Always - 16613
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 9
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 060 045 Old_age Always - 36 (Min/Max 24/40)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
194 Temperature_Celsius 0x0022 036 040 000 Old_age Always - 36 (0 22 0 0 0)
195 Hardware_ECC_Recovered 0x001a 034 018 000 Old_age Always - 13935595
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 522 -
# 2 Extended offline Completed without error 00% 68 -



# 3 Extended offline Completed without error 00% 6 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.




------------------------------------------------------------

# smartctl -a /dev/sda |grep -i err
was completed without error.
without error or no self-test has ever
Error logging capability: (0x01) Error logging supported.
SCT Error Recovery Control supported.
1 Raw_Read_Error_Rate 0x000f 082 063 044 Pre-fail Always - 183032997
7 Seek_Error_Rate 0x000f 087 060 030087 060 030 Pre-fail Always - 584077719
__DEFINE_LIKE_SHARE__