الاداة toolkit v7.0 لـ galaxy s3 لعمل الريكفوري والروت ....

[محروم.كوم]

هذة الاداة المميزة لعمل الريكفوري والروت وتنزيل الرومات الرسمية واعادة تركيب الرومات ....
هنا النسخة الخاصة بالجالكسي s3
فكرة الاداة بسيطة جداً عند تشغيلها اذا ظهر لك خيار التحديث للاداة اضغط no
بعد ظهور واجهة الاداة اختر الروم الذي انت علية مثلاً الروم 4.1.2 اختر الرقم 6



اذا اردت ان تعمل فلاش يجب ان تقوم بتوصيل الجهاز بوضع الدانلود مود
واذا كنت تسعى لتركيب ريكفوري يجب ان تدخل الجهاز بوضع الريكفوري
بعد اختيارك رقم الاسوفت وير ما عليك الا اختيار الرقم المناسب مثل الروت اختر الرقم 2 ثم اختر ملف الروت الذي تريد ثم yas او فقط الحرف y




1. INSTALLING GALAXY S3 DRIVERS

The first thing you need to do is to install the drivers. These are needed so that you can communicate with the phone via the PC and perform the tasks that the ToolKit offers.

NOTE: If you have Kies installed then it is advisable to uninstall it first to avoid conflicts.

a. Make sure your device is booted into Android and the USB cable is unplugged.

b. Select Option 1 in the ToolKit to install the Samsung USB Driver pack. This should install all the neccessary drivers you need.

C. While the drivers are installing make sure that USB Debugging is enabled on your device via the Settings, Developer options Screen.

d. After the drivers have been installed connect the USB cable and the PC should detect the device and install the correct drivers. This will also happen when you enter Download Mode and Recovery Mode for the first time.

e. If you want to check the drivers then go to your Control Panel on your PC and open the Device Manager. With the USB cable connected you should see a device listed as 'Samsung Android Phone' or something similar and a driver attached to it.

--------------------------------------------------------------

3. FLASHING A ROM, RADIO, KERNEL OR ZIP FILE VIA CWM TOUCH RECOVERY

a. Download your chosen Rom, Radio or Kernel from the Development Forum, then make sure your phone is booted up as normal and connect your usb cable so it goes into MTP Mode. Copy the .zip file (DO NOT UNZIP IT FIRST) to the 'Internal Storage' part on your phone. Do not copy it to a Sub Directory as it will be harder to find when flashing it.



b. Enter CWM Touch Recovery (shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds).

c. Select 'Install zip from sdcard' and select 'choose zip from sdcard' if the file is on Internal Memory.

d. Scroll to your zip file and select. Then select 'Yes' in the list to start flashing.

e. When flashing is finished press the BACK Button to go back until you get to the Main Menu and then select 'reboot system now' to reboot your phone into Android.

--------------------------------------------------------------

3. FLASHING A ROM, RADIO, KERNEL OR ZIP FILE VIA TWRP TOUCH RECOVERY

a. Download your chosen Rom, Radio or Kernel from the Development Forum, then make sure your phone is booted up as normal and connect your usb cable so it goes into MTP Mode. Copy the .zip file (DO NOT UNZIP IT FIRST) to the 'Internal Storage' part on your phone. Do not copy it to a Sub Directory as it will be harder to find when flashing it.

b. Enter TWRP Touch Recovery (shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds).

c. Select 'Install' and select your file from the list if the file is on Internal Memory (for External Memory select it at the top).

d. Swipe your finger from left to right at the bottom to confirm the flash.

e. When flashing is finished select Reboot System or go back to Home for more options.
--------------------------------------------------------------

4. FLASHING A ROM, RADIO OR KERNEL VIA DOWNLOAD MODE USING ODIN

Odin can be used to flash image files or parts of your phone. You can flash something as simple as a boot image or a complete system. Everything is packed in a tar or tar.md5 file on your PC and flashed via Odin which is a Windows OS program.

a. Make sure you have your tar file stored on your PC.

b. Reboot your phone to Download Mode [shut down your phone, then hold down the Home + Volume DOWN Buttons and press the Power Button for about 2 seconds until a Warning screen appears. Press Volume UP to continue to Download Mode.

c. Connect your phone via usb and the first box at the top under ID:COM should turn blue and have some text in it. If you are using Download Mode on your phone for the first time then you will notice drivers being installed to use it.

d. The site or page you downloaded the file from will usually give you instructions to set Odin but if not you want to load boot/recovery/system files to the PDA location and have 'Auto Reboot' and 'F.Reset Time' ticked and nothing else.

e. Click on 'Start' to start the flash. You can see what is happening in the text box in the lower left.


galaxy_s3/Samsung_Galaxy_S3_ToolKit_v7.0

__DEFINE_LIKE_SHARE__