بسم الرحمن الرحيم

السلام عليكم ورحمة الله وبركاته

ماطول عليكم ياشباب والخبر هو نزول جهاز جديد من شركة ايكوم هو 2300 والى الان لم ينزل ولكن في الايام القادمه سوف يكون متوفر في مواقع بيع الاجهزه الاسلكيه

اخليكم مع صورة الجهاز ثم المواصفات


الصوره

http://www.icom.co.jp/world/products...duct_photo.jpg



Tough & Built to Last
Long Lasting Power and Icom Quality
65 Watts of RF Output Power with Heavy Duty Endurance
Powerful 4.5W Audio Output Provides Loud and Clear Audio
Tested to the Latest MIL-STD 810 G Specifications
Stable 65W of output power

The IC-2300H can generate 65W of output power. The rugged aluminum diecast provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission.
A total of 207 memory channels

The IC-2300H has a total of 207 memory channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 6 characters for easy recognition.
Built-in CTCSS and DTCS encoder/decoder

The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The tone scan function detects the subaudible tone that is used for repeater access. The pocket beep function gives you an audible and visual indicator of an incoming call.
The DTCS encoder function (DTCS transmit only) is also available.
Simple operation

The IC-2300H retains the basic panel layout and its user interface from the IC-2200H. A 70.6×20 mm LCD display offers a good viewing angle suitable for mobile operation. The bottom of the display indicates the available functions of the front panel buttons directly below the display.
Multiple scan functions

The IC-2300H supports various scan types for maximum reception and ease of use. The DMS (Dynamic Memory Scan) system allows you to scan selected banks from 10 memory banks by simply adding and deleting bank links .
Tested to the MIL-STD 810 G specifications

The IC-2300H is built tough to protect from a rough road. It has been tested to and has passed the latest MIL-STD 810 G specifications including shock, vibration and temperature tests.
Other features
Power supply voltage display
Wide/narrow channel setting
4.5W (typical) loud audio
Reduced depth dimensions
DTMF autodial
Time-out timer
Repeater lockout
Automatic power off
S-meter squelch
Selectable LCD backlight color (amber, yellow and green)
Weather channel receive and alert function (USA version only)
Automatic repeater function (USA version only)
Selectable squelch delay from short and long
Squelch attenuator reduces suppression from strong signals
PC to transceiver and transceiver to transceiver cloning capability
(optional cloning software, CS-2300H and/or cloning cable required)
Supplied accessories
Remote control Mic, HM-133V
Mounting bracket kit
Microphone hanger*
DC power cable
Spare fuses

* Depending on version




GeneralFrequency coverage USA version TX: 144–148MHz,
RX: 136–174MHz*
EXP version TX/RX: 136–174MHz*
KOR, TPE versions TX/RX: 144–146MHz
Number of channels 207 channels
(including 6 scan edges, and 1 call)
Type of emission F2D, F3E (FM)
Power supply requirement 13.8V DC ±15%
Current drain Tx (65W) 11A
Rx Stand-by 0.4A
Max. audio 1.5A
Antenna impedance 50Ω (SO-239)
Operating temperature range –10°C to +60°C; 14°F to +140°F
Dimensions
(projections not included; W×H×D) 140×40×162 mm;
5.51×1.57×6.38 in
Weight (approx.) 1.1 kg; 2.43lb

* Guaranteed range TX/RX: 144–148MHz
TransmitterOutput power
(at 13.8V DC) USA, EXP versions 65W, 25W, 10W, 5W
KOR version 50W, 25W, 10W, 5W
TPE version 24W, 10W, 5W
Max. frequency deviation Wide ±5.0kHz
Narrow ±2.5kHz
Spurious emissions Less than –60dBc
Frequency stability ±3ppm
Microphone impedance 600Ω (8-pin modular)

ReceiverIntermediate frequencies 46.35MHz/450kHz
Sensitivity at 12dB SINAD Less than 0.18μV
Adjacent channel
selectivity Wide More than 6kHz (at 6dB)
Less than 14kHz (at 60dB)
Narrow More than 3kHz (at 6dB)
Less than 9kHz (at 55dB)
Spurious response rejection More than 60dB
Audio output power 4.5W typ. (10% dist. 4Ω load)
External speaker connector 2-conductor 3.5 (d) mm (1⁄8ʺ)/4Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.Standard MIL 810G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.