مساعده لكسر حمايه n86 ببرنامج الجاف
 

سلام عليكم اشلونكم ان شاء الله زينين

اريد مساعدتكم في حل مشكله لكسر حمايه 86 وعند تفليشي للجهاز يطلع عندي
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.16.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-484\

Searching for default location of ini...
Checking path: \Products\RM-484\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-484\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-484\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-484\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-484\RM-484_21.006_prd.core.fpsx
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-484\RM-484_21.006_008_prd.language.fpsx
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-484\RM-484_21.006_54.1_prd.customer.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-484\RM-484_21.006_003_U001.uda.fpsx
Backing up CRT...
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\358270032537711_CRT_backu p_1235235.pm
Done!
Backup CRT OK!
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...ICPR72_09w36.25 30.009
Reading battery value...4062 mV
Init usb flashing...
Reading flashid...
CMT: 004000EC SAMSUNG (SEC) -> KAT00F00RA
APE: 00000000 Flash -> not detected
Verifing ADL communication... Status byte 7
Rebooting to flash mode...
Waiting for the phone to reboot...
Searching for phone...
Sending RAW loader...
Using 009.008.003
Elf2flash 09.14.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting...............